This hanger has been designed to be compatible with a wide variety of suspended ceiling L-molding from manufacturers such as Armstrong Ceiling, USG & Chicago Metallic where ceiling tiles are square edge cut and sit above the T-bars - not a beveled tile edge, concealed T or other less common configurations. The hanger is compatible with L-Molding where the exposed leg is up to 15/16 inch wide. This is about 75% or more of the drop ceiling market.
Simply insert a Barrel-End cable, of your choice, into the hanger. Then lift the grid ceiling tile slightly and insert the hanger over the lower leg of the wall L-molding in a desired location. Then lower the ceiling tile back to its normal position.
Ceiling grid wall molding is typically not fastened in such a way as to bear weight and this limits the strength of this solution. This hanger is compatible with L-Molding, which is typically found at the perimeter of a suspended (drop) ceiling. It is not compatible with T-bar which cross the space.
Color formulation is an average of the color and gloss of major manufacturer moldings.