Compatible with linear, concave, convex and serpentine wall sections and will follow a radius as small as six inches. Smart looking standoff track design. Each track is supplied with integral mounting hardware. You may use Ball-End cable paired with a C-Hanger, finished to match the track. Many think this is the most aesthetic combination, and for that reason, it is the cable combination listed within the Contempo System. You may also use either of P-End and J-End rod found under the Classic System or P-End and J-End steel cable/nylon cord found under the Cable System sections. J-End and P-End would be hung over the front side and the rear sides of the track, respectively. See "More Views"
Material: Extruded aluminum track
Length: 72 inches (6 ft) / 182 cm
Rated strength: 78 lbs (35 Kg) per track
Installation surface: Linear, concave, convex and serpentine walls.
Available colors: Natural, Anodized (Silver Satin, Champagne, Black).
Note: "Natural" finish should be field painted prior to installation. Both the track and spacers will oxidize if they are left unfinished. If you prefer an aluminum finish, please select "Silver Satin" finish.
Hole pattern: 9 pre-drilled 0.16" / 4mm holes for #6 screws. First hole is 4 inches from edge, the remaining are spaced 8 inches on center.
Includes: Nine (9x) each Contempo® Spacer; #6 x 2" colored screws (painted to match the track color) and TripleGrip™ anchors.
TripleGrip™ anchors may be used to mount the track to brick, cement, gypsum, plaster and ceramic surfaces.
Application image gallery: Contempo® System
Learn more about this product on our blog
Track Selection to Properly Fit Your Project
Product is marked 
which is a registered trademark of
AS Hanging Systems. Accept no substitutes.
The design of this product is 
