Mounting Plate - For Articulated Piers
For a well done installation, our Mounting Plate is the solution. This architectural hardware is needed when mounting Articulated Piers to gypsum board, and where there is no structural wood backing. 
IN STOCK
- Finish : Brushed nickel w/clear protective coat to match Articulated Piers
- Includes : Decorative Mounting Plate, Wing toggle anchor (opens to 1.5 inch but passes through 3/8 inch hole) with #6-32 x 2 in. machine screw
- Installation Surface : Ceiling, Floor, Wall
Product Details
Product details
When mounting the Articulated Piers to gypsum board where there is no structural wood backing, it is almost imperative to use specialized anchors other than common screw anchors.
These Mounting Plates are matched with Wing Toggle anchors to support Articulated Piers on common drywall. These Wing Toggles open to 1.5 inches but pass through a 3/8 inch hole. With an outside diameter of 1.5 inches, the plate spreads loads across a larger surface area and hides the hole used for the toggle.
To match with our Articulated Set, order 2 PIECES. With our Pair (2 sets) of Articulated Piers, order 4 PIECES.
NOTE:
It is the responsibility of the installer to select the proper mounting hardware for a particular installation.
AS recommended by leading experts, and your neighbours!
Let us ASsist you with your project!
Technical Specifications
- SKU U5527
- Finish Brushed nickel w/clear protective coat to match Articulated Piers
- Includes Decorative Mounting Plate, Wing toggle anchor (opens to 1.5 inch but passes through 3/8 inch hole) with #6-32 x 2 in. machine screw
- Installation Surface Ceiling, Floor, Wall
- Installation Skill Do-It-Yourself
- Legacy Systems Families Tensioned Cable System
Reviews
