In most cases, no. AS Hanging wall tracks are engineered to be installed level and horizontal, and that is how they perform best. A horizontal rail keeps fasteners loaded evenly, lets hooks and hangers slide smoothly for repositioning, and gives the system its clean, gallery quality look. ...
The cleanest way to install a wall track perfectly level is to mount it flush against the ceiling and follow the existing ceiling line, which hides the track and blends it into your décor. If you prefer a lower position, mark your pre-drill points with a standard or laser level before ...
Installing an AS Hanging Display Systems track is straightforward for most do it yourself users. Every track ships with step by step instructions, and each product page includes installation videos for that specific profile, so you can follow along before and during the job. Built in or ...
Yes. AS Hanging Display Systems are fully compatible with concrete and brick walls when you use the correct masonry anchors and drilling approach. In fact, masonry walls often make an excellent base for a permanent track installation because the substrate is dense, stable, and capable of ...
Yes, you can cut AS Hanging Display Systems tracks to size. All tracks are made from high-quality aluminum, a metal soft enough to cut cleanly with common tools. Use a hacksaw with a miter box, or a power miter saw fitted with a fine-tooth blade. After cutting, remove any burrs so the ...
Yes. AS Hanging Display Systems tracks are built for far more than framed art. The same rail-and-hook setup that holds a painting will safely display a whiteboard, a wall clock, a mirror, quilts and textiles, seasonal decorations, and signage. If an object lacks its own hanging hardware, ...
No. Installing an AS Hanging Display Systems picture rail is a straightforward DIY project that uses common household tools: a tape measure, a level, a drill, a screwdriver, and a pencil. Each track ships with the correct wall anchors and screws. Brick or concrete calls for a masonry bit, and ...
Installing a picture rail on drywall or gypsum board is a clean, stud-free job when you use the right anchors. Mark a level line just below the ceiling, transfer the track's pre-drilled hole positions, and drive the supplied TripleGrip anchors sized to your wall thickness. Screw the ...
AS Hanging Display Systems tracks install on nearly every solid wall: drywall, plaster, brick, concrete, and ceramic tile, as long as you use the fastener suited to that surface. The TripleGrip anchors supplied with most tracks cover drywall in 3/8, 1/2, and 5/8 inch thicknesses. Glass ...
Not necessarily, and they do not need to. AS Hanging Display Systems tracks are engineered to reach their full rated load using the included wall anchors, so a secure installation does not depend on the pre-drilled holes lining up with studs. Follow the Installation Guide, anchor at ...
