Art & Picture Hanging Systems
The Adhesive Hangers made of galvanized steel are designed to be fastened to the back of aluminum, light metal, PVC foam board, and plexiglass panels. They are panel-specific attachments.
- Installation Surface : Panels
The Adhesive Hangers are made of galvanized steel and designed to be fastened to the back of aluminum, light metal, PVC foam board, and plexiglass panels. They are panel-specific attachments. There are several sizes available: 2-in, 2.75-in and 4-in. Choose the size of the Adhesive Hanger depending on the panel’s weight. Depending on the size and weight of your panel, two Adhesive Hangers might be required.
To use this self-adhesive hanger, follow the steps below:
Step 1: Make sure there is no oil or grease on the panel surface where the Adhesive Hanger will be attached. Rubbing alcohol can be used to remove any oil or grease from the panel. Allow the panel to dry after washing it.
Step 2: Remove the liner from the back of the Adhesive Hanger.
Step 3: Fastened the Adhesive Hanger to the freshly cleaned area of the panel’s back.
Step 4: Put weight on the Adhesive Hanger and give it 72 hours to rest.
2-in: max weight 1 kg
2.75-in: max weight 2 kg
4-in: max weight 4 kg
Sold in pair.
Hang with the Best®
AS recommended by leading experts and your neighbors!
Let us ASsist you with your project! 1-866-935-6949
- SKU U517x
- Installation Surface Panels
- Installation Skill Do-It-Yourself