Art & Picture Hanging Systems
The Adhesive Hanger made of galvanized steel is designed to be fastened to the back of aluminum, light metal, PVC foam board, and plexiglass panels. It is a panel-specific attachment.
- Installation Surface : Panels
- Cable/Rod Presentation : Suspended
The Adhesive Hanger is made of galvanized steel and designed to be fastened to the back of aluminum, light metal, PVC foam board, and plexiglass panels. It is a panel-specific attachment. There are several sizes available: 2-in, 2.75-in and 4-in. Choose the size of the Adhesive Hanger depending on the panel’s weight. Depending on the size and weight of your panel, two Adhesive Hangers might be required.
To use this self-adhesive hanger, follow the steps below:
Step 1: Make sure there is no oil or grease on the panel surface where the Adhesive Hanger will be attached. Alcohol can be used to remove any oil or grease from the panel. Allow the panel to dry after washing it.
Step 2: Fastened the Adhesive Hanger to the freshly cleaned area of the panel back.
Step 3: Put weight on the Adhesive Hanger and give it 72 hours to rest.
It is now possible to hang the panel by the Adhesive Hanger. To prevent wall damage, use picture hanging systems (tracks-cables-hooks) in combination with Adhesive Hangers
2-in: max weight 1 kg
2.75-in: max weight 2 kg
4-in: max weight 4 kg
Hang with the Best®
AS recommended by leading experts and your neighbors!
Let us ASsist you with your project! 1-866-935-6949
- SKU U517x
- Installation Surface Panels
- Installation Skill Do-It-Yourself
- Cable/Rod Presentation Suspended