This hanger has been designed to be compatible with a wide variety of suspended ceiling L-molding from manufacturers such as Armstrong Ceiling, USG & Chicago Metallic where ceiling tiles are square edge cut and sit above the T-bars - not a beveled tile edge, concealed T or other less common configurations. The hanger is compatible with L-Molding where the exposed leg is up to 15/16 inch wide. This is about 75% or more of the drop ceiling market.
Simply insert a Barrel-End cable of your choice or the compatible Nylon Cord into the hanger. Then lift the grid ceiling tile slightly and insert the hanger over the lower leg of the wall L-molding in a desired location. Then lower the ceiling tile back to its normal position.
Ceiling grid wall molding is typically not fastened in such a way as to bear weight and this limits the strength of this solution. This hanger is compatible with L-Molding, which is typically found at the perimeter of a suspended (drop) ceiling. It is not compatible with T-bar which cross the space.
Color formulation is an average of the color and gloss of major manufacturer moldings.