Finish the exposed ends of Wall Track with a color matched End-Caps. This End-Cap is well engineered to both fill and finish the ends of our Wall Track and also act to retain Anti-Theft Secure Rods.
Each End-Cap is reversible so it may be used on either end of a track. Simply slide the body into the exposed track end. Lightly tighten the set-screw with the supplied 2.5 mm Allen key. Apply the cover over the End-Cap. That’s easy! The top edge of the cover extends slightly above the track to better facilitate removal, if that is desired.
When used with Anti-Theft Secure Rods the End-Cap is strong enough to retain a rod within the track cavity, thus minimizing this method of defeating the Anti-Theft Rod solution.
Product is marked which is a registered trademark of AS Hanging Display Systems.
Accept no substitutes. The design of this product is under patent numbers D746,666 and D749,402.
© 2014, 2015 AS Hanging Display Systems. All rights reserved.
AS Hanging Display Systems and its logo are trademarks of AS Hanging Display Systems.
=AS=, Boardless, Casso, Contempo, Footprintless, Hang with the Best are registered trademarks of AS Hanging Systems.
All photo images property of AS Hanging Display System, unless otherwise noted. Unauthorized use or reproduction is strictly prohibited.