Fixed Pier Set

In stock
SKU
U551z

Fixed Piers are used to attach a tensioned cable to ceilings and floors. They may be used in retail environments to create window displays, walls dividers, etc.

In StockIN STOCK

Compatible with Ceiling Systems Compatible with Tensioned Systems
See full product description »
Starting at $29.80 /ea.
  • Finish : Anodized Machined Aluminum or Black
  • Includes : Fixed Pier Long, Fixed Pier Short, Barrel-End Stainless Steel Cable 120 in (10 ft) / 305 cm or 240 in (20 ft) / 610 cm, Cable Stop, Spring, Allen Key, 2X #6 x 1¼ in. screws and TripleGrip™ anchors, 2X #6 x 2 in. wood screw
  • Installation Surface : Ceiling, Floor
  • Weight Capacity : 150 lb (68 kg) per pier
  • Cable Presentation : Tensioned

Fixed Piers are used to attach a tensioned cable to ceilings and floors and are most often used in pairs (two cables). They may be used in window openings to create display designs, or near walls to create a floating effect or perpendicular to perimeter walls to establish a divider. This tension cable kit hang panels, art pieces, plexiglass, acrylic sheets or glass panels and much more from any type of solid ceiling and floor (fixed attachment). Fixed Piers only take a small footprint space.

This Tension Cable Kit is our heavy-duty solution as the cable may span as long as 20 feet. These are only to be used with cables running in a vertical axis, never in a horizontal manner. As illustrated, the short pier should always be used at the upper location.

The mounting hardware included in this assortment may be used to mount a pier base to brick, cement, plaster, ceramic surfaces or structural wood. Optionally, to mount the piers to gypsum board (drywall) please also order our Mounting Plates, which include Wing Toggles.

NOTE:

It is the responsibility of the installer to select the proper mounting hardware for a particular installation.

Rated strength: While the Upper Pier and supplied cable are rated for 150 lbs. when installed by fastening into structural wood with the appropriate fastener and the fastener is engaged 1” or more into lumber the weight capacity of an individual pier/steel cable may be as low as 10 lbs., or less (static load), depending on the mounting hardware and installation technique. Actual capacity is dependent upon the installation. It is the responsibility of the installer to select the correct fastener for a particular installation.

AS recommended by leading experts, and your neighbours!

Let us ASsist you with your project!

HIGHLY RECOMMENDED

Cable Trim Kit

Cable Trim Kit

  • SKU U551z
  • Material Aluminum
  • Finish Anodized Machined Aluminum or Black
  • Includes Fixed Pier Long, Fixed Pier Short, Barrel-End Stainless Steel Cable 120 in (10 ft) / 305 cm or 240 in (20 ft) / 610 cm, Cable Stop, Spring, Allen Key, 2X #6 x 1¼ in. screws and TripleGrip™ anchors, 2X #6 x 2 in. wood screw
  • Installation Surface Ceiling, Floor
  • Weight Capacity 150 lb (68 kg) per pier
  • Cable Presentation Tensioned
  • Installation Skill Do-It-Yourself
  • Product Marking =AS=
  • Legacy Systems Families Tensioned Cable System
You are rating:Fixed Pier Set

Your comments are valuable to us. Our customers appreciate reading about the experience you share. Your opinion will also allow us to make the best selection of products for your satisfaction. Thank you!

Your Rating
Cancel
Fixed Pier Set