This is the most versatile of our tracks, and the strongest too. It will support cables from our Cable System and rods from our Classic System. The open-faced design allows for either to be suspended from the lower lip of the track. This design is very convenient. However, because the track profile also offers a "roof" it appears more finished than common utilitarian J-rails. The roof also plays a part in the Anti-Theft solution. See Anti-Theft Rods.
The open-faced design does make it possible to see the mounting screws but this is mitigated by the fact that the track is commonly mounted above the line of sight. Additionally, the mounting screws, included with each track length, are painted to match the track color.
Material: Extruded aluminum track
Length: 72 inches (6 ft) / 180 cm
Rated strength: 300 lbs (135 Kg) per track
Installation surface: Wall
Available colors: Natural, Anodized (Silver Satin, Champagne, Black), Painted (Warm White, semi-gloss).
Note: "Natural" finish should be field painted prior to installation. The track will oxidize if left unfinished. If you prefer an aluminum finish, please select "Silver Satin" finish.
Hole pattern: 9 pre-drilled 0.16"/4mm holes for #6 screws. First hole is 4 inches from edge, the remaining are spaced 8 inches on center.
Includes: Nine (9x) each #6 x 1.25" colored screws (painted to match the track color) and TripleGrip™ anchors.
TripleGrip™ anchors may be used to mount the track to brick, cement, gypsum, plaster and ceramic surfaces.
Compatibility: Classic System, Cable System
Application image gallery: Classic System, Cable System
Learn more about this product on our blog
Difficult Walls, Part 3: Protecting Specialty Finishes
Determining Safe Weight Limits for Hanging Art or Large Photos
Strongest Hooks for Your Heavy Wall Hangings
Introducing Cable Tensioners
With Our Hanging Systems … It’s In The Bag!
Lowe’s Creativity – Our Wall Hangers
New Product Introduction: Wall Track End-Cap … Completing “the Look”!