Fixed Pier, Long

This item may be used to attach a cable to a floor/ceiling, or any other surface, so a cable is oriented in a vertical axis. The design allows for more than 1/2" inch of tension adjustment.

This pier is not approved for use where cable would be deployed in a horizontal axis.

Material: Nickel over brass
Installation Surface: Ceiling/Floor
Finish: Brushed nickel

Includes:
Fixed Pier base and body
#6 x 2 in. wood screw
#6 x 1¼ in. screw and TripleGrip™ anchor

The hardware included in this assortment may be used to mount a pier base to brick, cement, plaster, ceramic surfaces and structural wood. To mount the piers to gypsum board (drywall) please also order our Decorative Mounting Plates, which include Wing Toggles.

NOTE: It is the responsibility of the installer to select the proper mounting hardware for a particular installation.

Rated strength: The weight capacity of an individual pier/steel cable may be as low as 10 lbs. or less, or as high as 100 lbs. (static load), depending on the mounting hardware and installation technique. AS hanging Systems publishes no specific weight capacity of this item.

Application image gallery: Tensioned Cable System

Learn more about this product on our blog
Introducing Short Fixed Piers